Description

The Wedge-Pro® II cutting sled is the 1st professionally designed and manufactured cutting sled. The Wedge-Pro® II cutting sled is extremely comfortable to use and most importantly keeps your hands clear of the blade. This complete kit (sled, material stop, push sticks) creates a turn-key package that has all you need to make segmented turnings safely and accurately on a table saw.

The Wedge-Pro® II has all the features that the original Wedge-Pro® has, except that it utilizes two fences which automatically adds angle error compensation, guaranteeing perfect segments and rings every time!

The two-fence segmenting sled advances the “flip-the-strip” paradigm and allows for more advanced techniques like zig-zag segments, tapered segments, skewed segments, flat stars, etc.

1. Includes a built-in zero clearance bed which eliminates the need for accessory table saw inserts.
2. Ships with miter bars that fit standard 3/4″ miter slots, however if your miter slot is smaller, the miter bar can easily be cut down using your table saw.
3. No setup blocks are necessary. The sled utilizes indexing holes for 8, 10, 12, 16, 18, 20, 24, 32, 36, 40, 48, 60, and 72 segments, and also has an indexing hole at 90° so the sled can be used as a standard 90° miter fence.
4. Sled features a unique sweeper that helps to safely remove segments away from the spinning blade.
5. The sled is designed for a left-hand configuration.  The Wedge-Pro® II is NOT reversible.
6. The adjustable fences have non-slip faces to prevent material slippage.
7. Includes two integrated spring-loaded clamps which provide hands-clear cutting and allows for utilization of the last few inches of each board.
8. Can handle cutting stock up to 2″ x 2″.  Material up to 5″ wide can be used if the 2nd fence is removed, you just have to flip the strip when cutting.
9. The sled is constructed using high quality Corian®, a very durable acrylic that will not damage blades with indirect contact.
10. All provided hardware is stainless steel and corrosion resistant.
11. No need to create half rings as this sled creates perfect segments that create perfectly tight rings every time!
12. The Wedge-Pro® II fits a wide variety of table saws, but the dimension from the center of the miter bar slot to the edge of the blade must be between 2-1/2″ (64mm) & 7-3/4″ (196mm)

** Includes a specially designed material stop & thin-ripping jig!

** Includes two sacrificial push sticks!

Why should I buy the Wedge-Pro® II? The main advantage the 2nd fence on the two-fence version provides an auto-correction as the two fences are opposing.  This is convenient in the event that the sled isn’t setup perfectly perpendicular to the blade.  The two-fence version is most common and more traditional, but unless you are creating advanced segments that use bevels and miters, the single-fence version will work perfectly.

Patent Pending

The bowl shown above uses rings & segments that were cut using the Wedge-Pro®, used with permission.

For videos on how to setup and use the Wedge-Pro® cutting sleds, please visit our channel on YouTube.

The Wedge-Pro® II is in the final stages of design and testing and will be available to ship mid-December 2023.  Final design may be slightly different than shown in the product photo.